Staff Answer
Sep 26, 2026 - 08:51 AM
Here's the general process for pulling an N510:
1. Shut off the LP at the tank and disconnect shore power and 12V. 2. From the outside access panel, disconnect the gas line at the fridge and cap it. Then unplug the 120V cord and disconnect the 12V leads. 3. Take out the mounting screws. On most installs, there are screws through the front frame flange (sometimes hidden under trim) and screws or brackets at the rear base, reachable from the outside panel. 4. Slide the fridge out the front. It's awkward, so a second set of hands helps.
When it goes back in, leak-test the gas connection with soapy water.
If you have any questions, just reach out at info@rvfridgeguys.com or call us at 800-712-8822. You can find everything we carry at www.rvfridgeguys.com.
