Staff Answer
Sep 28, 2026 - 06:19 AM
Since you've already replaced the burner, board, gas valve and igniter, look at what's left. Make sure the flue is clean and the baffle is in place. Check that the electrode tip sits right in the flame (not too far away). Check LP pressure at the fridge, because a regulator that drops pressure over time can cause this. Also check that the 12V stays solid during the night, since low voltage can cause a no-flame lockout. If you're in a windy spot, wind through the lower vent can blow it out, too.
If you have any questions, just reach out at info@rvfridgeguys.com or call us at 800-712-8822. You can find everything we carry at www.rvfridgeguys.com.
